Setup Orbi Pro SRS60 router Wi-Fi through a web GUI 

The Netgear Orbi setup SRS60 can easily connect with your satellite using a web GUI. The web URL routerlogin.net is the default address to access the control panel. Put it into the browser and hit the OK button. Next, the web GUI will ask for your Orbi default password and username. You will get the Orbi router login page as soon as you hit the login tab.

You can also use a WPS button for connecting the router with a satellite. It is also called the push button. You have to press this Push button for at least 7 to 10 seconds on your router, and then over your satellite. And let them synchronize to get the Orbi admin login page. You can even scan the Orbi firmware login Network to connect with the routerlogin.net page. Initially, we need to install the router and the satellite with the help of the Orbi setup page. After installation, you can change the Orbi default password and username for the security of your Orbi SRS60 Pro router.

Instructions to connect your Orbi SRS60 Pro router with the satellite  

STEP 1. Disconnect and power off the router

Disconnect your existing router from the computer with your broadband modem and power outlet. If you do not have a router, move to the second step. You should connect your latest router to the power outlet and configure its network. It will help you establish a strong network with the Orbi login SRS60 Pro device and the satellite.

STEP 2. Switching off the modem

To power off the modem, disconnect it by removing the adapter from the power source. If your modem has backup batteries, do not forget to remove the batteries also. 

STEP 3. Connect your router to the modem 

For this connection, you have to use the included Ethernet cable. Hook one end of the Ethernet cable into the router and the other end into the modem. 

STEP 4. Power on the Modem

Plugin the power adapter and reinsert the backup batteries of the modem. It will take a minute or two to start the modem. Wait till it gets started completely. 

Connect the satellite with your Orbi setup SRS60 pro 

Insert the power adapter into the PWR port of your Orbi wifi router and then plug it into any suitable power outlet. Plug the satellite into a power outlet near the router. Power on the satellite, and press the WPS button on your router and the satellite for at least five seconds. Firstly, press the WPS button on your router and then the satellite. Next, you should connect your smart devices, like mobile, PC, tablet, or Macintosh, with the Orbi admin login SRS60 Pro Wi-Fi router network. 

Unlock a web browser to enter the web GUI

Open a web browser and go to the address line. Type here the web link is routerlogin net. You can even type the default IP address 192.168.0.1 given on the label of your router available on the rear panel. And then enter the Orbi default password and user ID to access the internet settings. 

Let’s get to the Netgear Orbi setup page

If you set up a Netgear Orbi SRS60 Pro router for the first time, the setup page will be loaded automatically. Click the options begin Setup to continue. If you want to manually configure the Orbi admin login page, then hit the continue button during the setup process. 

Detect the Orbi SRS60 Pro Internet Connection

  • To configure your Netgear Orbi internet settings and connect to the WiFi network. 
  • Use the Orbi default password and user ID to detect your internet settings. 
  • If there is a problem with your internet service provider, log in again. 
  • A prompt will appear to brief you about your internet connection issues. 
  • Once the Orbi setup page configures internet settings, you will see a green checkmark. 
  • You have to mark the check-in yes form to continue ahead. 

The Netgear Orbi SRS60 Pro login homepage will be loaded automatically. Congratulations, the Netgear Orbi setup process is successful. Now you can connect the additional devices you want to hook with it.